14
BA-PB3_IP_EN / F0354800
4
Transport/Storage
4.1
Storage
-
Store the machine in a dry place. This will prevent the electrical contacts from
corroding.
-
Protect the machine from dirt and foreign objects.
-
Protect the plasma generator and gas connection from dirt and foreign bodies.
4.2
Transport
The machine is designed for stationary use in production. It is not intended to be moved to
a different location on a regular basis. When transporting the machine, make sure that it is
switched off, disconnected from the mains and cooled down.
Check that all moving parts are in a stable, fixed position so that they cannot fall off when
moving the machine.
After transport is complete, make sure that the machine is placed in a stable and secure
position in a suitable place.
Attention
–
Damage to machine!
-
The machine can become damaged if you attempt to move the stand-
alone unit by pulling on one of the cables. Always ensure that there is
no nominal tensile stress on the cables. This also applies to the signal
cable of the optional remote control.
The cable assembly (incl. HV cable) or signal cable can also be
damaged by kinking or bending it too tightly. Do not kink the cable
assembly or signal cable and adhere to the minimum permitted bending
radii in accordance with the “Technical data” chapter (page 12).
-
A ceramic component is built into the plasma generator. This can
become damaged in the event of hard impacts or falls, and can in turn
damage the machine. Always ensure that the plasma generator is
secured against impacts and falls during transport.
5
Unpacking and installation
Caution
–
Electrical voltage!
Danger: 230 V and high voltage.
- The entire machine must not be opened. The stand-alone unit is sealed by the
manufacturer. In the event of damage to the seal, the warranty is voided.
5.1
Unpacking
•
Carefully open the machine packaging. Note the information about directions provided
on the packaging.
•
Take the machine out of the packaging.
•
After taking the machine out of the packaging, check it and all cables for damage.
