BA-PB3_IP_EN / F0354800
13
Gas connection
•
Gas types
Compressed air (purified, free of oil and lubricants)
Nitrogen (industrial gases free of particles and oil)
Additional gas types only after approval from
relyon plasma
.
•
Gas flow rate
40
–
80 l/min
•
Quality
Compressed air 1.4.1 acc. to ISO 8573.1
Nitrogen 2.8 (N2) acc. to DIN EN ISO 14175:N1
•
Connection
6 mm quick-release coupling
3.2
Permissible operating parameters
The specified limits or conditions must be observed during operation:
Description
Value
Gas flow
Air:
≥ 40 –
≤ 80 l/min
Nitrogen:
≥ 40 –
≤ 80 l/min
Activation period
100% (continuous mode)
Plasma on
Before activating the high voltage for plasma
generation, the gas supply to the plasma generator
must be switched on for at least 2 seconds.
Caution
–
Electrical voltage!
•
Danger from high voltage
- Never reach into the plasma flame or onto the substrate to be treated during
operation.
- All components, workpieces or tools that come into contact with the plasma must
be either insulated (dielectric strength > 30 kV) or fastened or held with a secure
earth.
Attention
–
Damage to machine!
- The required gas flow rate is between 40 and 80 l/min and must not be fallen short
of or exceeded.
Non-compliance will damage the plasma generator beyond repair.
