Communication GUI Guide
GXE600 Series
TDK-Lambda
<Page>
16/41
3.7 Multi Monitor T ab
T his tab monitors multiple GXE at the same time.
T here are variations in the update interval of the monitoring value.
Also, as the number of active button checks increases, the update cycle is extended.
Up to 10 monitoring is possible, but synchronization is not taken.
T he monitored data can also be saved as LOG data.
T he LOG operation continues even when the Multi Monitor tab is deselected.
2) Unit ID input field
4) Output current indication
6) Alarm history indication
1) Active button
3) Output voltage indication
5) Internal T emperture indication
7) LOG status
Item
Overview
1
Active button
T he checked line will start monitoring.
During monitoring, the Unit ID is locked and can not be changed.
2
Unit ID input field
Set the Unit ID to be monitored.
Baud Rate, Parity Bit depends on the setting on the GUI Configuration tab.
3
Output voltage indication
Displays the monitored output voltage.
4
Output current indication
Displays the monitored output current.
5
Internal Temperture
Displays the monitored internal temperture.
indication
6
Alarm history indication
Displays the monitored protection operation history.
If there is more than one, one will be displayed as the representative.
7
LOG status
Indicates the status of LOG processing.
8
LOG Start / Stop button
T his button manipulates the start / end of the LOG function.
Destination
：
(My Documents)\TDK-Lambda\G-AXESS\GXE_Access\Log
File name
：
GXE600_MultiLog_yyyymmddhhmmss.csv
( The file name contains the time when LOG saving started. )
9
LOG Open button
T his is a button to open the save destination of LOG data on Windows Explorer.
・
Log data sample
T he figure below is a sample of the saved CSV file.
When there are multiple alarm histories, only one display was representative on the Multi Monitor tab. But LOG data will show all alarms.
Please confirm the T imestamp column by converting the display format to time in Excel.
Data acquisition time
Unit ID , Output voltage, Output current, Internal Temperature
Alarm History
8) LOG
Start / Stop
button
9) LOG Open
button