Communication GUI Guide
GXE600 Series
TDK-Lambda
<Page>
10/41
3.2 Main screen
T he main screen has measurement information, remote control function, etc.
1) ON/OFF button 2) Screen mode switching 4) LotNo. + Serial No.
5
）
Life of Electrolytic Capacitor 6) Operation time
3) Unit ID
7) GXE internal Temperature
8) T ab display omitted button
9) Alarm History
10) Alarm History clear button
Item
Overview
1
ON/OFF button
Control ON / OFF of GXE. When an analog is selected in the remote control setting,
"ON/OFF button" is not displayed.
2
Screen mode switching
Switch the screen mode with "Graphical"
⇔
"Manual".
3
Unit ID
T he Unit ID of the connection target is displayed. It is also possible to change.
4
LotNo. + Serial No.
Displays the lot number and serial number of the connected GXE.
5
Life of
Displays the predicted remaining time for electrolytic capacitor "Lo" in percent.
Electrolytic Capacitor
For details, refer to "3.8 E-CapLife tab".
6
Operation time
T he cumulative operating time of the GXE is displayed. (not including Remote off time)
7
GXE internal
T he measured value of GXE internal temperature is displayed.
Temperature
8
Tab display omitted
It switch display / hide the tab screen.
button
9
Alarm History
T he alarm information of the protection operation that occurred is displayed.
In the communication register, OVP is divided into SWOVP / HWOVP and
OCP is divided into SWOCP / HWOCP.
However, they are represented by OR in Grahical screen mode.
10
Alarm History
Clear the Alarm History.
clear button
However, if the cause of the Alarm History has not been removed, it can not be cleared.