INSTRUCTION MANUAL
GXE600 Series
TDKLambda
<Page>
Special Instructions for IEC/EN/ES/CSA 606011
• These products are designed for continuous operation within an overall enclosure, and must be mounted such
that access to the mains terminals is restricted.
• These products are not suitable for use in the presence of flammable anesthetics mixtures with air or with
oxygen, or with nitrous oxide.
• The output circuit has not evaluated for connecting to Applied Parts. For end products intended to connect the
output circuit to Applied Parts, suitable evaluation of the separation, leakage current, dielectric voltage
withstand, and related requirements should be conducted.
• Doublepole/ neutral fusing. Option model
“
/SF
”
have fuse only live line.
• These products provide One Means Of Patient Protection (1MOPP) between Primary/Secondary and FG, and
Two Means Of Patient Protection (2MOPP) between Primary and Secondary.
• The 48V model have possibility that hazardous voltage might occur in output terminal depending on failure
mode (The output voltage is 60V or more on failure mode). The output of these products must be protected in the
end use equipment. If it is not acceptable, contact us.
•
These products are classed as ordinary equipment according to IEC/EN/ES/CSA606011 and are NOT
protected against the ingress of water.
•
Reference should be made to local regulations concerning the disposal of these products at the of their
useful life.
Note
•
Take note that traces of sheet metal processing be left in our power supplies.
• When disposing product, follow disposal laws of each municipality.
• Published EMI (CE, RE) or immunity is the result when measured in our standard measurement conditions and
might not satisfy specification when mounted and wired inside enduser equipment.
Use the product after sufficiently evaluating at actual enduser equipment.
• When exporting our products, apply for necessary permissions as required by rules and regulations of Foreign
Exchange and Foreign Trade Control Act.
• Catalogue, contents of the instruction manual might be changed without a prior notice. Refer to latest
catalogue or instruction manual.
• Reproduction or reprinting the instruction manual or its portion is forbidden without our permission.
• CE Marking
CE Marking, when applied to a product covered by this handbook, indicates compliance with the low voltage
directive.
STORAGE METHOD AND STORAGE PERIOD
•
Store in original package
• Prevent excessive vibration, impact and external force from being applied during storage.
• Store in an area out of direct sunlight
• Temperature and humidity should be within range of product specification (with no condensation)
• Storage period should be up to two years from receiving.
3/28
