manualshive.com logo in svg

TDK-Lambda Genesys Series, Technical Manual

Share
Download
TDK-Lambda Genesys Series Technical Manual Download Page 28

24

The following settings are shown on the “LAN 

‡

 Configure” web page:

IP Address Source:

  Displays the way the IP address was selected. Options are DHCP/

Auto-IP and Static IP

IP Address:

  Displays the IP address assigned to the power supply through either DHCP, 

Auto-IP or Static IP sources

Subnet Mask:

  Displays the subnet mask assigned to the power supply through either 

DHCP, Auto-IP or Static IP (see glossary 1.3.16)

Default Gateway:  

Address of the network router to allow the power supply to communicate 

outside of the local subnet

DNS Server:  

Address of the server running the Domain Naming Service. This is used for 

hostname addressing

Hostname:

  the power supply name that may be used by a web browser (see section 3.4) 

or by a VISA resource name (see section 6.3) to create a communication link. The default 
hostname is derived from the model and serial number (see the hostname in section 5.2) or 
it may be changed in the “LAN 

‡

 Configure 

‡

 Modify” web page

Description:

  By default, this is “Genesys Power Supply”, but it may be changed in the 

“LAN 

‡

 Configure 

‡

 Modify” web page

Modify:

  After logging in (see section 5.3), click this button to open the window shown below

5.5.2. LAN 

‡

 Configure 

‡

 Modify Page

If you are logged in and click the “Modify” button on the “LAN 

‡

 Configure” window, the 

following pop-up window appears. On this window, you may enter new values for the LAN 
settings. Changes to these setting will not take place until the “Apply” button is clicked

Note:   After changing the LAN settings (other than the description), the 
web browser will automatically close. Re-open it using the new address 
(see section 3.4)

Summary of Contents for Genesys Series

































































Reviews:

No comments

Brands by name

Popular brands

Load more brands