3
NOTE
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual,
may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in
which case the user will be required to correct the interference at his own expense.
WARNING
Modifications not expressly approved by the party responsible for compliance could void
the users authority to operate the equipment under FCC Rules.
CE Notice (European Union)
Marking of the CE symbol indicates compliance to the EMC Directive and the Low Voltage
Directive of the European Union. Such marking is indicative that the
™
series meets the following
technical standards:
•
EN 60950-1: Information technology equipment - Safety - Part 1: General requirements.
•
EN 61204-3: Low-Voltage switch mode power supplies – Part 3: Electromagnetic compatibility (EMC).
WARNING
This is a Class A product. On a domestic environment, this product may cause radio
interference in which case user may be required to take adequate measures.
WARNING
This is a product designed for an industrial environment. In a residential, commercial or
light industrial environment it may cause radio interference. The user may be required to
take adequate measures to reduce interference.
