- 8 -
TDK-Lambda
EZA2500 series
Quick Manual / Basic
・
Hjelmslund Electronics
USB485-MB45
Hjelmslund Electronics
http://www.hjelmslund.dk/default.asp
When using above, it is necessary to install the exclusive driver software distributed by the
manufacturer on your personal computer. For details, refer to the instruction manual of the
maker purchased.
b)
Connection with peripheral devices
The following figure shows an example of connection when EZA 2500 is controlled from a PC:
personal computer using RS-485.
In the figure, the inverter is supposed to be capable of bidirectional power conversion from AC
to DC, from DC to AC, called a regenerative function, and supplies electric power converted
from AC to DC to EZA during battery charging.
Note) Since there is a male terminal of RJ45, you
can connect it to RJ45 of EZA and use as it is.
Considering CPU reset, maintenance, and troubleshooting, it is
recommended to insert NFB and magnet switch between the
battery and EZA, EZA and inverter respectively.
When the auxiliary power supply of EZA is activated, the
communication with EZA is possible with RS485 and the internal
parameter setting becomes possible.
