- 12 -
TDK-Lambda
EZA2500 series
Quick Manual / Basic
①
Port Number Selection: Select the port number in the box.
· The COM port list of the PC is displayed in this box.
· If the COM port is not displayed, check the COM port of PC and restart
“CNVCommCC”.
②
Baud rate selection box: Select 19200.
③
Press the "SET" button.
CNVCommCC applies the settings and opens the port.
④
If opening the port fails, an error message is displayed. Click the
“
CLOSE
”
button to close the window. Check the COM port and the EZA
DIP switch settings, and start over from step
①
.
Communication setting
window
If the COM port is not displayed, there is a possibility that
the USB / RS 485 conversion converter is not functioning
properly. Confirm that the driver distributed by the
conversion converter manufacturer is correctly installed on
the PC.
EZA's DIP switch is set at 19200 baud rate at factory
shipment.
