- 11 -
TDK-Lambda
EZA2500 series
Quick Manual / Basic
④
Confirm that you can communicate with PC with EZA.
③
Restart the control board.
Apply specified voltages to the grid side and battery side terminals of the
EZA. This operation is unnecessary if you do not operate the DIP switch
or rotary switch
The control board is activated by applying the
specified lower limit voltage to either the battery
side or the grid side.
When the control board is activated, the green
LED that is visible through the punching metal on
the back panel, lights up.
Confirm that you are connected as shown in p8 or p9 of this manual.
Launch “CNVCommCC.exe” on your computer.
※
The following message is displayed at the initial startup or when the
port you used last time cannot be opened.
Please click "OK" and make communication settings.
If you select "Communication Setting" from the menu, or if you cannot open the
port at startup, the communication setting window will be displayed.
Follow the instructions on the next page to configure communication settings.
Communication setting
The control board reads the values of DIP switch
and rotary switch at restart.
