09/2013
11
TCS TürControlSysteme AG, TCS Hotline Germany: +49 41 94/ 9 88 11 88
Subject to technical changes.
FAX: +49 41 94/ 9 88 129
Mail: [email protected]
PI_IMM2500 1A
Connect the external push button
The connection terminal is located on the PCB
within the upper cover of the module with special
functions.
Via a pluggable screw terminal with 2 pins, an ex-
ternal push button can be connected.
The switch time of the external push button must
be at least 1 second!
Snap-on the upper covers of the modules
1.
Place the upper cover at both adjustment in-
crement of the lower cover (
1
).
2.
Place the handset cord correctly within the re-
cess of the upper cover (avoid damages) and
snap-on the upper cover (
2
)
Open the device
1.
There is a rectangular re-
lease openings at the under-
side of the device for each
module. Insert a small
screwdriver (around 7 mm
width) straight and with slight
pressure into this opening.
2.
The upper cover can be re-
moved separately at the un-
derside of the device.
3.
Lift the upper cover out of
the two upper adjustment in-
crements.
