10
05/2013
TCS TürControlSysteme AG, TCS Hotline Germany: +49 (0) 41 94/ 9 88 11 88
Subject to technical changes.
FAX: +49 (0) 41 94/ 9 88 129
•
Mail: [email protected]
PI_FVM1000-0400_uk.doc Revision: 1
Factory settings
The device is equipped with a SD card, on which the following settings are stored ex
works:
operation mode
0= one-family-home mode
delay time for automatic recording
1 s
number of images for the automatic image series after a
door call
1
Video-AS-border for automatic recording
Images from front-door stations with a video-AS-border smaller than 31
are recorded.
31
encoding for image buffering
1 (activated)
date format
0 (DD.MM.YYYY)
master code
serial number FVM1000
brightness control
0 dB (fully counterclock-
wise position)
Reload factory settings via push-button
!
Attention! When reloading the factory settings all images are deleted, the master code
and all settings that had been made are set back.
LED, green lights up
LED, green blinks
LED, green blinks
fast
LED, green lights up
press the button
Reload factory set-
tigs and hold it …
…, until the LED
blinks fast, than re-
lease it
factory settings are
loaded
Note:
Reloading the factory settings may take a few minutes because of deleting so many images.
During the delete process, the yellow LED is on.
If all images are deleted and the factory settings are reloaded, a positive acknowledgement tone sounds. The yellow
LED expires.