01/2013
9
TCS TürControlSysteme AG, TCS Hotline Deutschland: [email protected]
Subject to technical changes.
www.tcsag.de
PI_AMI1090x-uk 1A
Delete the programming
Before an already programmed bell button can be programmed anew, the programming
must be deleted.
1
Initiate
Switch on the programming mode of the system
Shortly press the
RUN/PROG push button LED blinks
Namenplate of the bell button module blinks.
Programming mode of the system is switched on
2
Delete a button
◄6s►
Press the button until a negative
and positive acknowledgement tone sounds
1)
Release
3
End
oder
Shortly press the
RUN/PROG push button
LED is on
Nameplate of the bell button module ON (or OFF).
Programming mode of the system is switched off.
1) If there sounds an Progsperr tone instead, the programming lock of the front-door station is activated. The
programming lock can only be deactivated with the Service Device TCSK-01 or the configuration software
configo
TM
.
