manualshive.com logo in svg

TCS Basys Controls QWL 3.1 2 Series, Product Manual, Page: 2 / 11

Share
Download
TCS Basys Controls QWL 3.1 2 Series Product Manual Download Page 2

R

2800 LAURA LANE • MIDDLETON, WI 53562 • (800) 288-9383 • FAX (608) 836-9044 • www.tcsbasys.com

2

QWL 3.1 REV 2 SERIES PANEL WIRING 

 

            

 

QWL 3.1 REV 2 SERIES PANEL LAYOUT

Mounting                                 

The QWL 3.1 Rev 2 Series Panel is designed for mount-

ing using four #10 pan head screws. 
When drilling ensure that the QWL 3.1 Rev 2 Series 

Panel is powered down and all metal shavings are cap-

tured.

Wiring                                     

The QWL 3.1 Rev 2 Series Panel terminal designations 

are shown below.

INPUT WIRING

The QWL 3.1 Rev 2 Series Panel accepts two 0 to 5 VDC 

inputs, 8 dry contact/digital inputs and 4 pulse meter inputs.  

POWERING THE QWL 3.1 REV 2 SERIES PANEL

The QWL 3.1 Rev 2 Series Panel is powered from a 

120VAC @ 60HZ to 12VDC power supply module (includ-

ed). The QWL 3.1 Rev 2 Series Panel is designed to contain 

24 VAC devices and wiring ONLY. No line voltage (120 VAC 

or greater) is to be installed within this panel.

Main Board

O

O

O

DI Board

DI Board

Main Board

1" EMT Knockout 

for use with

 ¾" Conduit

NOTE: 

If drilling, the QWL 

3. 

1 Rev 2

 series 

panel must be pow-

ered down and metal 

shavings must be 

contained. 

DI8 DI7        DI6 DI5 

               DI4 DI3        DI2 DI1

See RS-485 

controller network 

wiring diagram.

Summary of Contents for QWL 3.1 2 Series












Reviews:

No comments