TCS Basys Controls QWL 3.1 2 Series Product Manual Download Page 1

Page: 1 / 11

2800 LAURA LANE • MIDDLETON, WI 53562 • (800) 288-9383 • FAX (608) 836-9044 • www.tcsbasys.com

Product Manual

Description

The QWL 3.1 Rev 2 Series Integrated Building Manager

Panel contains a Ubiquity

Site Gateway with integrat-

ed lighting and energy management controls.

Features

Ubiquity Site Gateway

• Site gateway to Ubiquity: enables controller interoper-

ability with Ubiquity

• Enables Ubiquity to maintain controller programming

and scheduling

• Compatible with all TCS Basys supported controllers

• Controller protocols supported: TCSbus, Modbus

• Supervisory control routines

• Supervisory override strategy

• Auto discovery of networked controllers

• Three integrated RS-485 serial ports

• Additional serial ports can be added via USB ports

• Integrated Ethernet controller with firewall capabilities

• Integrated configuration web page

• User adjustable controller monitoring rate

• Remotely upgradable gateway software

Lighting Controller (SLQ218)

• 365-day programming for each circuit

• Analog input for photo sensor with the ability to

remotely adjust sensitivity level

• Selectable power failure state

• Eight channel lighting schedules for interior and exte-

rior applications

• Digital photocell inputs

• Astronomical clock

• External time clock or occupancy sensor input for

each channel

• Channel status LEDs

• Selectable normally open or normally closed relays

• Built-in 2 Amp relays with hand/off/auto switches

Contents

Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Factory IP Network Address Configuration

. . . . . . . . .

Mounting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

RS-485 Controller Network Wiring & Setup

. . . . . . . . . . 3

Gateway Configuration Page

. . . . . . . . . . . . . . . . . . . . .

Commissioning Tools

. . . . . . . . . . . . . . . . . . . . . . . . . . .

Programming - Lighting Module . . . . . . . . . . . . . . . . . . . 6

Programming - Pulse Meter . . . . . . . . . . . . . . . . . . . . . . 9

TCS ZigBee Wireless Network. . . . . . . . . . . . . . . . . . . 10

LED Display and Push Buttons . . . . . . . . . . . . . . . . . . 10

Checkout & Troubleshooting . . . . . . . . . . . . . . . . . . . . 10

Energy Meter (SEQ100)

Utility Pulse Counting Meter for Monitoring of:

• Electric single and 3 phase kW and kWh

• Gas

• Water

• BTU

QWL 3.1 Rev 2 Series

Integrated Building Manager Panel
Models to Support Wired and
Wireless Networks

Factory IP Network Address

Configuration

The QWL 3.1 Rev 2 Series Panels are typically ordered

pre-programmed to customer specific networks and no

additional software configuration is required. This is the

preferred purchasing method.
If a QWL 3.1 Rev 2 Series Panel is purchased without

pre-programming it will be shipped with DHCP client

enabled. The configuration page is available through a

browser for additional configuration of the QWL 3.1 Rev

2 Series Panel local IP address. Contact your network

administrator to determine the local IP address (refer to

the MAC address available on the product label).

v1216.1

Summary of Contents for QWL 3.1 2 Series












Search results

Summary of Contents for QWL 3.1 2 Series

Reviews:

Related manuals for QWL 3.1 2 Series

Brands by name

Popular brands

TCS Basys Controls QWL 3.1 2 Series, Product Manual

Search results

Summary of Contents for QWL 3.1 2 Series

Reviews:

Related manuals for QWL 3.1 2 Series

Brands by name

Popular brands