manualshive.com logo in svg

TC Works SPARK LE, User Manual

Share
Download
TC Works SPARK LE User Manual Download Page 23

23

B R O W S E R   V I E W

2

W

AVE

E

DITOR

The Waveform  Display

The waveform display is the heart of any audio editor.The loaded audio file is displayed by 
an amplitude graph over time. For a mono file you will see one graph; for stereo files, two.
The “0” line at the center of each graph marks the lowest, the “100” at the top and bottom
represent the highest possible signal level.

The upper part of the waveform display is the waveform overview, the lower part is the edit
view where the editing takes place.

O

VERVIEW

The overview section of the waveform is for navigation through your audio file.You cannot
make any changes or edits in the OVERVIEW except to move the cursor.

C

URSORS

SPARK LE features two cursors:The red PLAYBACK CURSOR will show the current 
playback position, and the green EDIT CURSOR displays the current edit position.

When you start playback, the EDIT CURSOR will remain at the start position until you set
it to a different location by single clicking elsewhere on the waveform.
When you start playback, the PLAYBACK CURSOR will scroll through the audio during
playback.When you press "Stop” on the transport, the PLAYBACK CURSOR will rest at
the last playback position.

When you move the position of the PLAYBACK CURSOR, the EDIT CURSOR will jump to
the same position.

Waveform overview

Edit view

Zooming Tools

Info Line

Drawing Tools

2_BrowserView_neu  20.06.2002  13:58 Uhr  Seite 23

Summary of Contents for SPARK LE


































































Reviews:

No comments

Brands by name

Popular brands

Load more brands