FINALIZER D.C.
32
Target
The Target parameter simplifies the control of the Finalizer D.C. significantly, by drastically
reducing the amount of parameters to adjust. Instead a large amount of parameters are set
appropriately in the background, with you having to care only about the most relevant
settings. Therefore the extremely powerful Finalizer D.C. is easier to adjust than a simple
broad-band compressor.
By setting a Target Type, you can focus on a type of processing suitable for your material.
Linear
All three bands are processed equally.
Static frequency response: Linear,
Dynamic frequency response: Linear.
Cross-over frequencies: 315Hz and 3.15kHz.
Applications: Neutral processing, Film & Post.
Pink
More attenuation on the Hi band with high levels.
Static frequency response: Linear,
Dynamic frequency response: Less brightness.
Cross-over frequencies: 315Hz and 3.15kHz.
Applications: Gentle processing, Classical music, Film & Post.
Talk
Mid band accentuation.
Static frequency response: Linear,
Dynamic frequency response: Focus on Mids.
Cross-over frequencies: 250Hz and 5kHz.
Applications: Speech and Vocal, Broadcast, Film & Post.
Hyped
Optimized Attack and Release times for maximum perceived loudness and brightness.
Static frequency response: Brighter,
Dynamic frequency response: Brighter.
Cross-over frequencies: 315Hz and 3.15kHz.
Applications: Processing for loudness, Pop music, Commercials.
Smiley
Hi and Lo processed more. Dynamic Attack and Release times.
Static frequency response: Smiley,
Dynamic frequency response: Smiley.
Cross-over frequencies: 315Hz and 3.15kHz.
Applications: Processing for loudness.
