M2000 D.C. PHASER
25
TC’s famed guitar Phaser pedal, TC XII, has been transferred to the digital domain and
made more flexible. This new true stereo algorithm is clean enough for even master
monster Phasing.
By using the Order parameter, the Phaser is able to simulate different configurations of
analog all-pass filters. To select the frequency range affected, use the Focus control.
The Phaser effect is very sensitive to the balance between the effect and the direct signal.
Because of this we have added a Fx / Direct balance control which enable you to route a
complete signal through the algorithm, for instance an entire bus signal. For use in a Aux
send / return environment, normally leave the balance at 100% effect.
Do not route the direct signal both through the UNIT•Y card and internally in the 02R.
Doing so will produce unwanted phase cancellations due to small timing differences in
delay between the two signal paths.
Rate
LFO Mod
Depth
LFO Mod
Feedback
Amount
Fx / Dir
Balance
L / R
Balance
Feedback
Phase
Frequency Focus
Filter
Order
UNIT•Y Phaser Engine screen
