RETURNS
STANDARD ROUTING NO DIO
16
Main Screen for UNIT•Y card without I/O extension
Example 2. 5.1 Surround production using UNIT•Y card without I/O extension
To return the engines in a discrete surround configuration with a UNIT•Y card in slot 2, use
the Output Selectors on the UNIT•Y Main screen to select destination “13.14” for Engine 1
and “15.16” for Engine 2.
Turn up both Engine faders (Stereo fader 17/18 and 19/20) to 0dB.
Go to the normal 02R fader mode and turn up Tape input faders 13-16. Typically you would
make them into two stereo pairs.
Make these 5.1 surround routing assignments:
Tape input 13 to LFr (Left front), Tape input 14 to RFr (Right front).
Tape input 15 to LS (Left surround), Tape input 16 to RS (Right surround).
If you wish to engage the Centre and Sub speaker for FX, the Centre should be made from
a mix of LFr and RFr (typically at -6dB or lower compared to LFr and RFr), while the Sub
can be made from a mix of all four FX returns.
Factory presets for discreet surround on the UNIT•Y card depend on this channel
assignment. They are all labelled “5.1 xxxx”.
Engine 1 should take care of the front channels, while Engine 2 produces the surround.
Input Select
Output Select
Engine Output Faders
These fields show “x” to show that
no I/O extension is available
