GETTING STARTED
8
After installing the software provided with the UNIT•Y card, you should see the V2 power-
up screen within seconds after power is applied to the console. If that does not happen, the
EPROMs have not been positioned correctly.
Do not leave the console powered on if the screen does not become active.
To see the OS revision number, hold down the UTILITY button while powering the console
on. The 02R UNIT•Y software will identify itself, e.g. 2.10TC.
When the console has been confirmed operational, power it down again. Now you may fit
the UNIT•Y card into any slot.
Each UNIT•Y card is basically controlled from 3 LCD screens on the 02R. The screens are
accessible by holding down the FLIP button, thus entering 02R MIDI REMOTE mode.
Alternatively, use the MIDI button to show page 5/5.
The first time you select the UNIT•Y card, press a REMOTE number according to the
UNIT•Y slot you are accessing. With a card in Slot 1, press REMOTE 1. With a card in Slot
2, press REMOTE 2 etc. After selecting the correct remote number, dial up the TC
Electronic screen with the wheel.
The 20 faders now control the UNIT•Y engines as described on the next pages of this
manual.
To exit UNIT•Y control mode, hold FLIP for a short while or press any other 02R screen
button, e.g. the VIEW button.
W
HICH SLOT SHOULD BE USED FOR THE
UNIT•Y
CARD
?
The UNIT•Y card may be fitted into any slot. More cards may be used simultaneously,
but only one of them can use Extended Routing. A UnitY card using Extended routing
is placed in slot 3 or 4, so you may still use all analog inputs of the 02R.
