TC Electronic FireworX, User Manual

Page: 24 / 83

EFFECTS SETUP
Effects
24
Exercise 7:
Inserting an effect
Press the Effects key
Use the Arrow
keys to select
the Routing
display
Dial Value
wheel to select
sub-algorithm
Double click
the Mute key of
the block you
want to insert
Press Enter to insert
the block
Exercise 8:
How to change a sub-algorithm
Select the Routing page
Dial Parameter
wheel to select
effect block
Dial
Value wheel
to select new
sub-algorithm
Press Enter to confirm
Exercise 8:
How to change a sub-algorithm
The Delay that you just inserted is a One-Tap Delay that contains
only one delay time. Let’s try to find a delay with two delay
times so we can get it different in left and right:
- Move the cursor to the Delay block using the
parameter wheel.
- Dial the Value wheel until you see “Delay - Dual” in
the lower text line.
- Press Enter to confirm.
You now have a Dual delay algorithm, where you are able to set
different delay times in left and right channels (remember to set
the panning of the two delay taps).
Exercise 7:
Inserting an Effect
There are two ways of inserting an effect. Let’s start by setting
up a Phaser and after that a Delay
- Press the Effects key (if you are not already there).
- Use the < > Arrow keys to select the Routing page.
- Use the Parameter wheel to place the cursor in
the 1 1 position (position is indicated in the lower right
corner of the Routing display).
- Dial the Value wheel until you see “Filter - Phaser” in
the lower text line of the display and press Enter to
insert the Phaser in the Routing.
And the other way after accessing the Routing page:
- Place the cursor in position 2 1 in the Routing display
- Double click the Delay Mute key, Dial the Value
wheel until you see “Delay 1 - One-tap“ in the lower
text line of the display.
- Press Enter to confirm.
You now have a Delay block set in series with a Phaser.
EFFECTS
DELAY
ENTER
ENTER