OPERATING PROCEDURES
6-7
Model C303 & C314
Operating Procedures
6
9.
Press the MENU SELECT key to start the sanitize
mode.
10. Repeat step 6 through step 9 for the remaining
freezing cylinder.
11. Open the prime plugs. Place an empty pail under the
door spouts. When sanitizing solution fills the
freezing cylinders approximately 2/3 full, close the
prime plugs.
Figure 6-25
12. Continue filling the freezing cylinders with sanitizing
solution until the solution purges out of the relief
valve at the top of the mix tank and begins draining
into the front drip tray. Press the OFF (<- -) key.
13. Press the BEATER (- - -) key. Agitate the solution in
the freezing cylinders for five minutes.
Figure 6-26
14. With a pail beneath the door spouts, open the draw
valves and drain all the solution from the freezing
cylinders. Press the OFF (<- -) key and close the
draw valves.
Figure 6-27
15. Disconnect the syrup connectors in the sanitizing
solution.
Priming/Brixing
1. Connect the syrup line to the Bag-in-Box (BIB) syrup.
2. Remove the drip tray, splash shield, and lower front
panel to gain access to the syrup sampling valves.
3. Open the prime plug.
Figure 6-28
11228
13040
13039
11229
Summary of Contents for C303
