Taylor-Dunn B0-248-TT, Operation, T Roubleshooting And Replacement Parts Manual, Page: 22 / 204

SAFETY RULES AND OPERATING INSTRUCTIONS
Safety Rules
Page 8
Parking
Before leaving the vehicle:
•
Set the parking brake.
•
Set the forward-off-reverse switch to the ` “OFF”
position.
•
Rotate the start switch to the “OFF” position.
In addition:
•
If parking this vehicle on an incline, turn the wheels
to the curb, or block the wheels.
•
Do not block fire aisles, emergency equipment,
stairways, or exits.
This vehicle is equipped with regenerative
braking. Follow these steps before towing
this vehicle.
1. To tow this vehicle the start switch must
be in the “OFF” position.
2. Place the forward/reverse switch in the
center “OFF” position.
Failure to follow these instructions may
result in damage to the vehicle.
The park brake should be disabled for
servicing or towing procedures only. Do not
operate the vehicle while the automatic
park brake is disabled. Operating the
vehicle with the automatic park brake
disabled could lead to severe bodily injury
and/or property damage.
Towing This Vehicle
To tow this vehicle, attach a tow strap to the front bumper
tow-bar.
NOTE: If the vehicle is equipped with an automatic
electric brake, do not tow the vehicle with
the drive wheels on the ground.
Use another driver to steer this vehicle while it is being
towed. Be sure the driver uses the brakes when the
towing vehicle slows or stops. Do not tow the vehicle
faster than 5 m.p.h. or its maximum designed speed,
whichever is lower.
If at all possible, this vehicle should be placed on a carrier,
rather than towing.