Taurus TF-UT Assembly And Operating Instructions Manual Download Page 16

Page: 16 / 52

ULTRA TRAINER

Step 5:

Assembly of the console upright post

(1)

Connect the console cables (D1 and

A1).

(2)

Slide the console upright post (D) on

the main frame (A).

(3)

Tighten the screw (J1), see illustration

Note:

Please make sure that the cables

are correctly connected and that the ca-

bles are not clamped during the assem-

bly.

Step 6:

Assembly of the console

(1)

Remove four screws (G1) at the back

of the console (G).

(2)

Connect the console cables (D1, G3,

G4) and the pulse cable (D4) with the

console. The pulse cables can be exch-

anged.

Note:

Please make sure that the cables

are correctly connected. Push excess

cable in the console upright post (D).

Please make sure that the cables are not

clamped during the assembly of the con-

sole.

(3)

At first, tighten the four screws (G1)

manually and then with a screwdriver to

tighten the console (G) safely on the con-

sole upright post (D).

8 m/m

View A

8 m/m

View A

8 m/m

View A

5 m/m

Abb. A

Summary of Contents for TF-UT





















































Search results

Summary of Contents for TF-UT

Reviews:

Related manuals for TF-UT

Brands by name

Popular brands

Taurus TF-UT, Assembly And Operating Instructions Manual

Search results

Summary of Contents for TF-UT

Reviews:

Related manuals for TF-UT

Brands by name

Popular brands