SelectaBell
Barbell
10
2.3
Assembly
Before assembly, take a close look at the individual assembly steps shown and carry out the assembly
in the order given.
L
NOTICE
First loosely screw all parts together and check that they fit properly. Tighten the screws using
the tool only when you are instructed to do so.
Step 1:
Assembly of the base frame
1. Mount the legs (2) to the bottom cross
bar (3) with four screws (13) and four nuts
(14).
2. Tighten the screws and nuts (13 & 14).
Step 2:
Assembly of the plate holders
L
NOTICE
+
Make sure that the holders are
mounted in the correct direction.
+
The screws (10) for the plate holders
are pre-assembled.
1. Attach the holders (6) to the top cross
bar (1) with a total of four screws (10).
2. Tighten the screws (10).
Summary of Contents for TF-ADB-80
Page 2: ...SelectaBell Barbell 2...
Page 24: ...Taurus SelectaBell Barbell...
