SelectaBell
Barbell
16
5.3
Maintenance and Inspection Calendar
To avoid damage from body sweat, the equipment must be cleaned with a damp towel (no solvents!)
after each training session.
The following routine tasks must be performed at the specified intervals:
Part
Weekly
Monthly
Quarterly
Half-yearly
Yearly
Lubricating the
adjustment pin
I
Screw connections
I
Legend: C = clean; I = inspect
6
DISPOSAL
At the end of its operational life, this equipment cannot be disposed of in normal household waste.
Instead, it must be disposed of via an recycling centre. Further information can be obtained from
your local authority‘s recycling service.
The materials can be recycled as per their symbols. Through the reuse, recycling
of materials or other forms of recovery of old equipment, you make an important
contribution to the protection of the environment.
Additional weight plate
If you pull a weight plate up too much (a
higher weight than you have chosen), it
may be because the adjustment lever is not
in the right place.
Align the adjustment lever correctly and lift
and lower the barbell 3-5 times.
Summary of Contents for TF-ADB-80
Page 2: ...SelectaBell Barbell 2...
Page 24: ...Taurus SelectaBell Barbell...
