Taurus TF-ADB-80, Assembly And Operating Instructions Manual

Page: 14 / 24

1
2
3
4
5
6
7
SelectaBell Barbell
14
The weight plates are not aligned correctly
If the weight plates are not properly aligned, the dumbbell may not be adjusted smoothly.
1. Check if there are any foreign objects (dirt/small parts) in the holders.
2. Select the maximum weight of 80lbs and lift the barbell 3-5 times.
3. Move the adjustment lever quickly back and forth 3-5 times.
4. Select 80lbs, turn the barbell over and put it back on the holders.
5. Press the two outer plates together 3-5 times.
6. Rearrange the weight plates.
7. Lift up the barbell and put it back on the holders 3-5 times
quickly. Make sure that the barbell is touching the bottom
of the holders.
Extended adjustment lever
If the adjustment lever is pulled out of the barbell, loosen
the screw at the bottom of the handle, push the lever back
in and tighten the screw.