21
Step 6:
Assembly of the Weight Horns and Extend Frames
NOTICE
+
Do not tighten the screws and nuts completely yet. Leave room for adjustments.
+
Any pre-installed set screws might need to be loosened fi rst.
1.
Attach two weight horns (20) to the left and right idler wheel frame (21 & 22) with one set screw
(49), one screw (61), one split lock washer (62) and one fl at washer (54) each.
2.
Attach two extend frames (18) to the left and right idler wheel frame (21 & 22) with one screw
(41), one screw (60) and two fl at washers (33) each.
3.
Attach the limit shaft (28) to the extend frames (18) with two screws (45).
4.
Tighten the screws from this assembly step.
Summary of Contents for 45 Degree Leg Press Sterling
Page 2: ...2 Leg Press...
Page 4: ...4 Leg Press...
Page 41: ...41 7 3 Exploded Drawing...
Page 51: ...51...
