17
Step 2:
Assembly of the Lead Rails and Wheel Frames
⚠
CAUTION
This assembly step must be carried out by at least two people.
NOTICE
Do not tighten the screws and nuts completely yet. Leave room for adjustments.
1.
Attach one lead rail (19) to the left bottom frame (1) with three screws (48).
2.
Attach one lead rail (19) to the right bottom frame (2) with three screws (48).
3.
Slide one large rubber bumper (29) over each lead rail (19).
4.
Carefully slide the left idler wheel frame (21) onto the left sided lead rail (19).
5.
Carefully slide the right idler wheel frame (22) onto the right sided lead rail (19).
Summary of Contents for 45 Degree Leg Press Sterling
Page 2: ...2 Leg Press...
Page 4: ...4 Leg Press...
Page 41: ...41 7 3 Exploded Drawing...
Page 51: ...51...
