53
50
53
19
Step 4:
Assembly of the Middle Connection Frame
NOTICE
Do not tighten the screws and nuts completely yet. Leave room for adjustments.
1.
Attach the lower part of the middle connection frame (11) to the upper beam frame (5) with two
screws (38), four fl at washers (53) and two lock nuts (50).
2.
Attach the upper part of the middle connection frame (11) to another upper beam frame (5)
with two screws (38), four fl at washers (53) and two lock nuts (50).
3.
Attach the upper beam frame (5) to the left and right union frame (3 & 4) with a total of four
screws (36), eight fl at washers (53) and four lock nuts (50).
⚠
CAUTION
This assembly step must be carried out by at least two people.
4.
Attach the limit tooth (12) to the middle connection frame (11) with two short pivot shafts (27), four
end caps (32) and four screws
(47).
Summary of Contents for 45 Degree Leg Press Sterling
Page 2: ...2 Leg Press...
Page 4: ...4 Leg Press...
Page 41: ...41 7 3 Exploded Drawing...
Page 51: ...51...
