33
MANUFACTURER’S DECLARATION OF INCORPORATION
(in accordance with European Directive 2006/42/EC App. II.B)
Manufacturer:
TAU S.r.l.
Address:
Via E. Fermi, 43 - 36066 Sandrigo (Vi) -
ITALY
Declares
under its sole responsibility, that the product:
Electronic control unit
designed for automatic movement of:
Sliding gates
for use in a:
Residential / Communities / Industrial
Model:
D820M
Type:
D820M
Serial number:
see silver label
Commercial name:
Control panel for 1 230 V AC three-phase gearmotor
Has been produced for incorporation on an access point (
sliding gate
) of for assembly with other devices
used to move such an access point, to constitute a machine in accordance with the Machinery Directive
2006/42/EC.
Also declares
that this product complies with the essential safety requirements of the following EEC direc-
tives:
- 2014/35/EU Low Voltage Directive
- 2014/30/EU Electromagnetic Compatibility Directive
Also declares that
it is not permitted to start up the machine
until the machine in which it is incorporated or of
which it will be a component has been identified with the relative declaration of conformity with the provisions of
Directive 2006/42/EC.
The following standards and technical specifications are applied:
EN 61000-6-2; EN 61000-6-3; EN 60335-1; ETSI EN 301 489-1 V1.9.2; ETSI EN 301 489-3 V1.6.1;
EN 300 220-2 V2.4.1; EN 12453:2000; EN 12445:2000; EN 60335-2-103.
The manufacturer undertakes to provide, on sufficiently motivated request by national authorities, all infor
-
mation pertinent to the quasi-machinery.
Sandrigo, 29/09/2021 Legal
Representative
_________________________________________
Loris Virgilio Danieli
Name and address of person authorised to draw up all pertinent technical documentation:
Loris Virgilio Danieli - via E. Fermi, 43 - 36066 Sandrigo (Vi) Italy
