10
TO THE OPERA
TO THE OPERA
TO THE OPERA
TO THE OPERA
TO THE OPERATOR
TOR
TOR
TOR
TOR
Identification of control levers
The diagram below shows the functioning of the control levers of the Tatu Back
Hoe and has copies of the decals that are handle of each control.
STABILIZERS:
(Levers 1 and 6)
Moving these levers forward lowers the stabilizers and vice versa.
The two stabilizers (shoes) should be fully lowered while in operation.
ARM:
(Lever 2)
Moving this lever forward extends the arm and vice versa.
BOOM:
(Lever 3)
Moving this lever forward unloads the bucket and vice versa.
BUCKET:
(Lever 4)
Moving this lever forward lowers the boom and vice versa.
HORIZONTAL ROTATION:
(Lever 5)
Moving this lever forward turns the unit to the left; the oposite action
turns the unit to the right.
Important:
NEVER CHANGE THE ADJUSTMENT OF THE PRESSURE OF THE CONTROLS.
Note: "RIGHT SIDE" AND"LEFT SIDE" AS INDICATED ABOVE REFERS TO WHEN THE OPEATOR
IS SEATED ON THE TRACTOR.
1
2
3
4
5
6
0503031328 - Rev. 0 - 12/02
THE MAIN VALVE, IN THE CONTROL VALVE INLET, IT’S CALIBRATED FOR 180 kgf/cm² (2,560 lbs/pol²).
LA VÁLVULA PRINCIPAL, EN LA ENTRADA DEL COMANDO, SE CALIBRA PARA 180 kgf/cm² (2560 lbs/pol²).
170 kgf/cm²
(2,418 lbs/pol²)
170 kgf/cm²
(2,418 lbs/pol²)
170 kgf/cm²
(2,418 lbs/pol²)
100 kgf/cm²
(1,422 lbs/pol²)
170 kgf/cm²
(2,418 lbs/pol²)
170 kgf/cm²
(2,418 lbs/pol²)
100 kgf/cm²
(1,422 lbs/pol²)
100 kgf/cm²
(1,422 lbs/pol²)
