17
3rd Point
Regulating Rod
Pin "A"
Guide
Chassis
SET
SET
SET
SET
SET-UP INSTRUCTIONS
-UP INSTRUCTIONS
-UP INSTRUCTIONS
-UP INSTRUCTIONS
-UP INSTRUCTIONS
Longtitudinal Levelling
The longtitudinal levelling is done by way of the holes in the regulating rod and
the guide in the following manner:
- Fully lower the stabilizing arms (With the Tatu Back Hoe hitched in service
position).
- Rest the bucket on the ground to facilitate manipulation of pin "A".
- Using the levers (except the rotation), level the chassis lengthways, working
again with pin "A".
IMPORTANT: AFTER JOINING THE TATU BACK HOE TO THE TRACTOR THE HYDRAULIC
LIFTING SYSTEM (3 rd POINT) CANNOT BE ACTIVATED; THAT IS, THE RAISING
AND LOWERING LEVERS SHOULD BE KEPT DOWN IN THE DOWN POSITION
DURING EXCAVATION, AS WELL AS WHEN TRANSPORTING.
