Tate Colson APX-03, Installation Instructions Manual

Page: 7 / 12

APX-03 Keypad & Proximity Reader Programming Instructions
MODE 3 - User Fob + 4 Digit Group code
Mode 3 provides more security by allocating a group of user Fobs with a common 4 digit code which has to be
entered after the Fob is recognised by the Keypad. When adding the batch of Fobs they must be programmed
into a different group from those being used for Fob only access (Mode 2).
You must Program the Fobs first before programming the Common Group code.
First Program the batch of Fobs as per Mode 2 but use a different Group number (see page 5)
Example Indication
1
2 Enter Function code 45 then EN FUN 45 EN OK indicator flashes
3 Enter Fobs Group No (01 to 20) then EN 01 EN OK indicator flashes
4 Enter New 4 Digit Group code then EN 5678 EN OK indicator flashes
5 Re-Enter New 4 Digit Code then EN 5678 EN Long Bleep and OK indicator flashes
6 Exit Programming Mode: FUN 2 EN Long Bleep and OK indicator flashes
Important Note: The Group Code will now have to be entered after the Fob is presented.
Enter into Programming mode as shown on page 4.
To Add a 4 Digit Group Code for
Fob+Code entry:
Note: To Delete a Group code follow the above programming but enter "0000" instead of the Group code.
When a Group code is deleted the Fobs will revert to Fob only (Mode 2) operation.
Fob+Code Operation : Hold the fob in front of the buttons within 7cm, keypad will bleep and OK will start to flash.
Enter the 4 digit Group code then EN. If Accepted OK will flash. If code is Rejected you will hear a long Bleep
and Error will flash. Re-Enter using the correct code
MODE 2 & MODE 3 - Deleting Fobs
Example Indication
1 Enter into Programming mode as shown on page 4.
2 Enter Function code 33 then EN FUN 33 EN OK indicator flashes
3 Enter option 0 then EN 0 EN OK indicator flashes
6 Enter the 10 Digit Fob number then EN 0001234567 EN Long Bleep and Power indicator flashes
7 Exit Programming Mode: FUN 2 EN Long Bleep and OK indicator flashes once
To Delete a single Fob by Number:
Example Indication
1
2 Enter Function code 32 then EN FUN 32 EN OK indicator flashes
3 Enter Group Number (01 to 20) then EN 01 EN OK indicator flashes
4 Exit Programming Mode: FUN 2 EN Long Bleep and OK indicator flashes once
To Delete a Group of Fobs by Fob
Number:
Enter into Programming mode as shown on page 4.
6
Web: www.tatecolson.co.uk E-mail:sales@tatecolson.co.uk Tel: 01704-502801 Fax: 01704-502810