APX-03 Keypad & Proximity Reader Programming Instructions
MODE 2 - User Fob only
Note: The Keypad will hold up to 12,000 user Fobs which are split up into 20 Groups of 600 Fobs.
Each group of Fobs must be numbered consecutively. Fobs can be programmed by number or by presenting the
lowest number Fob then the highest number Fob. If you have several batches of Fobs each batch must be
entered into a different Group number.
Example
Indication
1
2 Enter Function code 31 then EN
FUN 31 EN
OK indicator flashes
3 Enter option 0 then EN
0 EN
OK indicator flashes
4 Enter Group Number (01 to 20) then EN
01 EN
OK indicator flashes
5 Enter the lowest 10 Digit Fob number
0001234567 EN
2 Bleeps and OK indicator flashes to confirm
6 Enter the highest 10 Digit Fob number
0001234616 EN
Double Bleep and Power indicator flashes
7 Exit Programming Mode:
FUN 2 EN
Long Bleep and OK indicator flashes once
To Add a Group of Fobs by Fob No:
Enter into Programming mode as shown on page 4.
Example
Indication
1
2 Enter Function code 31 then EN
FUN 31 EN
OK indicator flashes
3 Enter option 1 then EN
1 EN
OK indicator flashes
4 Enter Group Number (01 to 20) then EN
01 EN
Error and OK indicators start flashing
5
When indicators start flashing present
lowest number Fob in front of buttons
Present Lowest Fob
Short Bleep & OK indicator flashes once
6
When indicators start flashing present
highest number Fob in front of buttons
Present Highest Fob
Long Bleep and Power indicator flashes
7 Exit Programming Mode:
FUN 2 EN
Long Bleep and OK indicator flashes once
To Add a Group of Fobs using Fob:
Enter into Programming mode as shown on page 4.
Fob Operation: To use the Fob simply hold in front of the buttons within 7cm. If Accepted you will hear a
short Bleep & OK will Flash. If Rejected you will hear a long Bleep & Error will flash once.
5
Web: www.tatecolson.co.uk E-mail:[email protected] Tel: 01704-502801 Fax: 01704-502810
