TATA Motors tigor, Owner'S Manual

Page: 80 / 159

STARTING AND DRIVING
78
Gear Shifting and Driving
The gearshift pattern is as shown on the
gear lever knob. Gear shifting should al-
ways be done with clutch pedal pressed.
NOTE

Depress the clutch fully when
gear shifting. The reverse gear
should be engaged only when the
vehicle is stationary. Wait for 5
seconds after declutching to en-
sure smooth engagement of the
reverse gear. Do not de-press
clutch pedal while driving the ve-
hicle stationary on a slope.

If clutch pedal lower/upper from
brake pedal, in this condition cus-
tomer should contact a Tata Mo-
tors authorized service center.
Current gear indication
The Driver Information display (DIS) in
the Instrument Cluster indicates the cur-
rent gear position engaged.
Gear recommendation
Up or down arrow will be displayed in
DIS, recommending whenever gear
should be shifted to up or down.
Drive modes
ECO mode can be used to adjust engine
characteristics and vehicle performance
in line with desired requirement.
Drive
Mode
Performance
ECO Optimum engine Torque
and Power output for
FUEL EFFICIENT perfor-
mance
City
Increased engine Torque
and Power output for
BALANCED performance
NOTE

Gear recommendation is di
played when the clutch pedal is in
fully released position.

If “F” is displayed in DIS of instru-
ment cluster it means ‘Fault’ con-
dition. Contact a TA-TA MOTORS
Authorized Service Centre.