TATA Motors tigor, Owner'S Manual

Page: 91 / 159

EMERGENCY AND BREAKDOWN ASSISTANCE
89
Wheel covers (if equipped)
Insert a piece of cloth between the
spokes of the wheel cover and pull it out-
wards. Take out detached wheel cover
from the wheel rim.
When installing the cover, make sure
that it is positioned so that it does not
cover the air filling valve. Apply equal
pressure at the circumference of the
wheel cover to fix it in the wheel rim.
NOTE
Do not use any sharp tools (such as
screw driver etc.) to remove the
wheel cover.
Changing flat tyre
Loosen the nuts of the flat tyre in diago-
nal sequence as indicated in figure. Do
not remove the nuts completely before
jacking the vehicle.
Wheel nut removal
Jacking point location on vehicle
Use the respective jacking points for
jacking up the vehicle. Jacking point lo-
cation are shown below.
Jacking point location