TATA Motors tigor, Owner'S Manual

Page: 67 / 159

CLIMATE CONTROL
65
use of MODE button to select the de-
sired airflow mode.
Each time you press the MODE button,
the display shows the mode selected.
Air flows from the cen-
ter and side air vents
Air flows from the cen-
ter, side vents and foot
well vents
Air flows from mainly
foot well vents
Air flows from the de-
froster and foot well
vents (always select
fresh air mode)
Air flows from the de-
froster vents (always
select fresh air mode)
8. “OFF” BUTTON:
Press the OFF button to switch OFF
The system. OFF will be displayed
on the display.
9. AUTO ON SELECTION
BUTTON
To put the automatic climate control in
fully automatic mode:
A. Press the ‘AUTO’ button.
B. Set the desired temperature by turn-
ing temperature control knob. The
display will show all the functions
during ‘AUTO’ mode.
C. The system automatically selects the
proper mix of conditioned and / or
heated air that will, as quickly as pos-
sible, raise or lower the interior tem-
perature to your preference.
D. When you set the temperature to its
lower limit (Lo) or its upper limit (Hi),
the system runs at full cooling or
heating only. It doesn’t regulate the
interior temperature.
Semi-automatic Operation
You can manually select various func-
tions of the climate control system when
it is in fully automatic mode. All other
features remain automatically con-
trolled. Making any manual selection
causes the word ‘AUTO’ in the display to
go OFF and overridden setting is dis-
played. System will remain in semiauto-
matic mode till ‘AUTO’ is re-pressed.