TATA Motors TIAGO XZ 2019, Owner'S Manual

Page: 128 / 184

EMERGENCY AND BREAKDOWN ASSISTANCE
120
5.
Insert the new bulb (without touch-
ing the glass) into the socket.
6.
Move the retaining spring up and
push it slightly until it locks properly.
7.
Refit the connector into the bulb and
press the rubber cover on headlamp
housing to fit it properly.
WARNING
It is dangerous if a halogen bulb
breaks. These bulbs contain pressur-
ized gas and if broken, will explode
causing serious injury by the flying
glass. Halogen bulbs can break if the
glass portion is touched with bare
hands, body oil could cause the bulb
to heat unevenly and explode when
lit. Never touch the glass portion of
the bulb with your bare hands and al-
ways wear eye protection when han-
dling or working around halogen
bulbs. Always keep halogen bulbs out
of the reach of children.
Replacing the position bulb
Unlock the position bulb by turning the
socket in counter clockwise direction.
Replace with the new bulb (refer bulb
specification table) and refit it by press-
ing and turning in clockwise direction
firmly into the socket.
Replacing the turn indicator
Unlock the turn indicator bulb by turning
the socket in counterclockwise direction.
Replace with the new bulb (refer bulb
specification table) and refit it by press-
ing and turning it in clockwise direction
firmly into the socket.