TATA Motors TIAGO XZ 2019, Owner'S Manual

Page: 121 / 184

EMERGENCY AND BREAKDOWN ASSISTANCE
113
Checking and replacing fuses
If any electrical unit in your vehicle is not
functioning, check the fuses first.
Please follow the steps below that will
guide you to check and replace them.

Apply parking brake

Switch off all electrical consumers.

Turn the ignition key to the 'LOCK' po-
sition.

In the fuse box, identify the defective
fuse from its melted wire.

Remove the blown fuse by “fuse
puller”. The fuse puller and spare
fuses are provided in the engine
compartment fuse box.
Engine compartment fuse box

Blown fuses must be replaced with
fuses of same rating, which you can
recognize by color and value.
NOTE
Always ensure that the spare fuses
are replenished.

Ensure that all other fuses are
pressed firmly in position.

If a newly inserted fuse also blows,
have the cause traced and rectified
at nearest TATA MOTORS Authorized
Service Centre immediately.
WARNING
If you manipulate or bridge a faulty
fuse or if you replace it with a fuse
with higher amperage, the electric
cables could be overloaded. This
could result in a fire. There is a risk
of an accident and injury.
Always replace faulty fuses with
the specified new fuses having the
correct amperage.