TATA Motors TIAGO XZ 2019, Owner'S Manual

Page: 58 / 184

DASHBOARD AND FEATURES
50
Combi-Switch (RH Stalk)
1. Left Turn signal
- Move the lever
fully upward.
2. Right Turn signal
- Move the lever
fully downward.
NOTE
When the turn is completed, the
signal will cancel and the lever will
return to its normal position.
3. High beam
- Move the lever forward
to select the High Beam function.
Pull the lever back to normal for low
beam.
4. High beam Flash (spring return)
To flash the high beam, pull the lever
towards you from the normal posi-
tion. It will return to its normal posi-
tion when you release it.
5. Headlamp Rotary Switch
i) OFF Position
All lamps will remain ‘OFF’.
ii) Parking Lamp
Rotate stalk to turn ‘ON’ the Parking
lamps.
iii) Low Beam
Rotate stalk to turn ‘ON’ the Low
Beam function.
6. Lane Change Signal
To signal a lane change, move the lever
slightly up or down respective to the
point where the turn signal light begins
to flash, but the lever does not latch. The
turn signal will flash
3
times automati-
cally.
7. Head lamp leveling rotary switch
Inner rotary switch on right hand stalk is
provided for head lamp leveling. With the
inner rotary switch, Head lamp leveling
can be done with head lamp in Low
Beam and in ‘ON’ position. Select cor-
rect position before start of trip and ve-
hicle is stationary. Depending upon the
number of passengers and luggage in
the vehicle headlamp focus may change.
This can be adjusted by rotating the
knob to one of the
3
level positions.