TATA Motors TIAGO XZ 2019, Owner'S Manual

Page: 100 / 184

STARTING AND DRIVING
92
Drive Mode:
Two drive modes ‘CITY’ and ‘SPORT’
are provided. These modes can be used
to adjust engine characteristics and ve-
hicle performance in line with desired re-
quirement.
CITY mode is the default
mode.
To activate SPORT mode, Press
‘S’ button situated on the gear shifter
console.
‘SPORT’ mode activation will be dis-
played on instrument cluster It can be
activated only in automatic mode. To de-
activate press the
‘S’
button again.
Stopping:
The vehicle can be stopped by depress-
ing the brake pedal regardless of the
gear position. This is because the clutch
is automatically disengaged to prevent
the engine from stalling.
If the gearshift lever is in the ‘A’ position,
the gear will be downshifte d to ‘
1st
’
when the vehicle stops. Also, if the gear-
shift lever is in the ‘M’ position, the gear
will be downshifted to ‘
1st’
when the ve-
hicle stops.
NOTE
‘AUTO’ mode will give optimum en-
gine Torque and Power output. Drive
the vehicle in
‘AUTO’ mode to get
max fuel economy. If in case of AC dis-
comfort switch to
‘SPORT’ mode
.
NOTE
Exhaust fan in the engine compart-
ment will remain 'ON' for a short while
after IGN is switched 'OFF'.
Parking:
AMT does not have a parking position.
The vehicle can be parked with the gear-
shift lever in any position.
1.
Apply the parking brake firmly.
2.
Depress the brake pedal and shift
the gearshift lever to the ‘R’ position
on a downhill slope, or to the drive ‘A’
mode or the ‘M’ position in the man-
ual ‘M’ mode on an uphill slope or
flat road and confirm the gear posi-
tion by checking the gear position in-
dicator on instrument cluster. Gear
engagement (R or A) can be done
with ignition ON/engine running con-
dition only.
3.
Turn the key to ‘ACC’ position to
switch off the engine. Before switch-
ing off the engine, run the engine in
idle condition for at least
30
seconds
and then switch off. This will allow
the engine oil to lubricate the turbo-
charger, till its speed is fully reduced
and also allow the unit to cool down.