TATA Motors TIAGO XZ 2019, Owner'S Manual

Page: 116 / 184

EMERGENCY AND BREAKDOWN ASSISTANCE
108
Place the flat tyre at spare wheel loca-
tion
.
NOTE
Check and correct the tyre pres-
sure and wheel nuts tightness of
the changed wheel at nearest au-
thorised service station.
Get the flat tyre repaired at the ear-
liest.
NOTE

The jack is designed only to raise
and hold the vehicle for a short
time while a wheel is being
changed. It is not suited for per-
forming maintenance work under
the vehicle.

Use the jack on level, hard
ground. Avoid changing the wheel
on uphill and downhill slopes. Ap-
ply wheel chokes if vehicle is
parked on slope.

Before raising the vehicle, secure
it from rolling away by applying
the parking brake.

Do not use wooden blocks or sim-
ilar objects as a jack underlay.

Never place your hands and feet
or lie under the raised vehicle
when it is supported by the jack.

Never run the engine when the ve-
hicle is supported by the jack and
never allow passengers to remain
in the vehicle.

Never open or close a door or the
tailgate lid when the vehicle is
raised.
Jump Lead Starting
Use only a battery of same rating & ca-
pacity to jump start your vehicle. Position
the booster battery close to your vehicle
so that the jump leads will reach both
batteries.
When using a battery of another vehicle,
do not let the vehicles touch.
Apply the parking brake firmly and keep
the gearshift lever in neutral.
Turn off all vehicle accessories, except
those necessary for safety like hazard
warning lamps.
Make jump lead connections as follows:

Connect one end of the first jump
lead to the positive (+) terminal of the
discharged battery.

Connect the other end to the positive
(+) terminal of the booster battery.