TATA Motors NEXON, Owner'S Manual

Page: 168 / 232

EMERGENCY AND BREAKDOWN ASSISTANCE
157
NOTE

The jack is designed only to raise
and hold the vehicle for a short
time while a wheel is being
changed. It is not suited for per-
forming maintenance work un-
der the vehicle.

Use the jack on level, hard
ground. Avoid changing the
wheel on uphill and downhill
slopes. Chock the wheels, if the
deflated wheel needs to be
changed on slope / ghat area.

Before raising the vehicle, se-
cure it from rolling away by ap-
plying the parking brake.

Do not use wooden blocks or
similar objects as a jack under-
lay.

Do not place your hands and
feet or lie under the raised vehi-
cle when it is supported by a
jack.

Do not run the engine when the
vehicle is supported by the jack
and never allow passengers to
remain in the vehicle.

Do not open or close a door or
the tailgate when the vehicle is
raised.
Assemble the Jack handle and wheel
spanner (as shown in fig.)
Position the jack vertically and raise it by
turning the jack handle clockwise until
the jack sits completely on the specified
point and the base of the jack lies evenly
on the ground.
The jacking points are indicated on
sill cover of the vehicle (Refer jacking
point location).
Jack up point location on vehicle
Jack up point location