TATA Motors NEXON Owner'S Manual Download Page 128

Page: 128 / 232

STARTING AND DRIVING

117



Fold the backrest seat forward again.
Move the driver and front passenger
seat forward if necessary.

NOTE

Ensure that ‘foldable arm rest’ is

closed before seat folding.

Rear seat folding (Complete Seat
100%)

You can increase the trunk capacity by
folding the rear seat. For folding:



Pull the backrest release knob pro-
vided on both side simultaneously.



Fold the seat backrest forwards.

WARNING



You should always engage the
rear seat if you do not need the
through loading feature.



If the rear bench seat and seat
backrest are not engaged they
could fold forwards, e.g. when
braking suddenly or in the event
of an accident.

Summary of Contents for NEXON









































































































































































































































Search results

Summary of Contents for NEXON

Reviews:

Related manuals for NEXON

Brands by name

Popular brands

TATA Motors NEXON, Owner'S Manual

Search results

Summary of Contents for NEXON

Reviews:

Related manuals for NEXON

Brands by name

Popular brands