TATA Motors NEXON, Owner'S Manual

Page: 112 / 232

CLIMATE CONTROL
101
NOTE
The AC can be switched ‘ON’ only if
the blower is ‘ON’ and engine is run-
ning.
When AC is switched ‘ON’, engine idling
RPM increases marginally to adjust the
AC compressor load.
When desired temperature is achieved
AC trips ‘OFF’ automatically.
NOTE

Condensate may drip from the
underside of the vehicle when it
is in cooling mode. Traces of
water on the ground are normal
and are not a sign of leakage or
malfunction.

Ventilate the vehicle for a brief
period during warm weather.
This will speed up the cooling
process and the desired vehicle
interior temperature will be
reached quickly.

Never cover the air vents or air
intake grills in the vehicle inte-
rior.

If the AC is not used for a long
period, such as during winter, it
may not give the best perfor-
mance when you start using it
again. Operate the AC at least
once a month to maintain opti-
mum performance.

While you start the vehicle after
a long duration (more than
15
days), follow the procedure for
better AC performance:
-
Start the vehicle and allow the
engine to idle for
2
-
3
minutes.
AC should be off in this period.
-
Switch the AC on and run it for
another
2
~
3
minutes while
the engine idles. This circu-
lates the refrigerant and oil to
lubricate the internal parts of
the air-conditioning system.