TATA Motors NEXON, Owner'S Manual

Page: 115 / 232

CLIMATE CONTROL
104
2. Blower Speed Control Knob:
Rotate the knob clockwise to increase &
anti-clockwise to decrease the blower
speed.
3. Max Defrost Button:
A. This button directs
the main airflow to-
wards windscreen
for faster defrost-
ing. (It also overrides any mode se-
lection you may have made).
B. When you turn off the button, the sys-
tem returns to its former settings.
NOTE
For your safety make sure you have
a clear view through all the windows
before driving.
4. Rear Window Demister Button:
This button turns the rear
window demister ON or
OFF. The system will be de-
activated after
15
min of
continuous operation.
5. Fresh Air / Recirculation Button:
A. When the recircula-
tion button or LED is
switched ‘ON’, air
from the vehicle’s in-
terior is sent throughout the system.
B. When the recirculation button is
switched to ‘OFF’, air from outside
enters into the cabin (fresh mode).
Whenever discomfort is felt, switch
to fresh air mode.
NOTE
The outside air intakes for the cli-
mate control systems are at the
base of windscreen. Keep this area
clear from leaves and other debris.
Use recirculation mode for faster heat-
ing and cooling. However, keeping the
system in recirculation mode - particu-
larly when the AC is in OFF - can cause
fogging of windows.
NOTE
When reverse gear is selected, air
inlet may switch to recirculation
mode if it is in fresh air mode, to pre-
vent exhaust fumes from entering
the cabin.