TATA Motors INDICA VISTA, Owner'S Manual

Page: 61 / 162

61
COMBI SWITCH (VISTA) INSTRUMENTS & CONTROLS
03
03
in upward direction changes the Low
beam to High beam and vice versa. For
High beam flash, pull the lever halfway.
For keeping in High beam position pull
up the lever further up to latch.
3) Light stalk (Turn Indicator):
LEFT HAND STALK :
1) Rear windshield - Wipe & Wash
rotary switch:
Outer rotary switch on left hand stalk
is provided for rear windshield wipe and
wash. The top (1st) position denotes
wash, which is spring loaded. After
releasing, the switch returns to the
OFF position. First position below OFF
position is for Wipe and second
position is for Wash + Wipe which is
spring loaded.
2) Intermittent front wiper delay:
Inner rotary switch on left hand stalk
is provided for intermittent front wiper
delay. The switch has 5 delay timers
for intermittent function.
Push the stalk upwards for changing
lane or turning to Left and downwards
for changing lane or turning to Right
according to requirement. It has three
positions.
A) Right turn indicator
B) Neutral position
C)Left Turn (Self cancellation / Manual
return type)
3)Front windshield-Wipe and Wash
rotary switch:
Pull the stalk upwards to operate
intermittent wipe (
- - - ), Slow wipe
( ) or fast wipe ( ). Pull the stalk
down for wipe and wash. Pull towards
driver for Flick Wipe (spring return).
After wash function is activated, there
will be three wipes of wiper. There will
be one more wipe after 5 seconds to
clean traces of water on wind screen.
A
B
C