TATA Motors INDICA VISTA, Owner'S Manual

Page: 63 / 162

63
COMBI- SWITCH (VISTA TECH) INSTRUMENTS & CONTROLS
03
indicator stalk is moved to downward.
For changing lanes, lightly flip the stalk
downwards.
B. Left turn signal :
Left indicator lamps and instrument
cluster tell tale will come ‘ON’ if
ignition is ‘ON’ and indicator stalk is
moved to upward. For changing lanes,
lightly flip the stalk upwards.
Depending on the number of occupants
in the vehicle and the load it is carrying,
the headlight axis may be higher than
desired. If the vehicle is traveling on a
hilly road, the headlights may directly
hit the rearview mirror of the vehicle
ahead or the windshield of the
oncoming vehicle. The light axis can
be lowered with the operation of the
switch.
Head lamp levelling setting :
Head lamp levelling setting is done by
rotating the knob to select one of the
3 levels marked on the knob depending
upon the loading of the vehicle.
When traveling without a heavy load
or on a flat road, select position 0.
Headlight beam:
A. OFF Potion:
B. Parking Lamp :
In this position, only Parking lamps
are switched ‘ON’.
C. High & Low Beam:
• To select the high beam function,
push the lever forward. The high
beam lights come on and the light
illuminates.
• Pull the lever back to select the low
beam.
• Pulling and releasing the lever
flashes the headlight high beams
on and off.
Lane change signal:
To signal a lane change, move the lever
up or down to the point where the
indicator light begins to flash, but the
lever does not latch. The turn signal
will flash three times automatically.