TATA Motors INDICA VISTA, Owner'S Manual

Page: 60 / 162

60
INSTRUMENTS & CONTROLS COMBI SWITCH (VISTA)
03
A) RIGHT HAND STALK
1) Head lamp leveling rotary
switch:
Inner rotary switch on right hand stalk
is provided for head lamp leveling.
Setting is done by rotating the knob to
select one of the 3 level positions
depending upon the loading of the car.
Head lamp leveling can be done with
head lamp in Low Beam and in ON
position.
Setting should be done only when
car is stationary
NOTICE
Since the leveling switch takes care
of headlamp focus pattern under
varying load conditions, it is
advisable to select the correct
position before starting a trip
(depending on load)
2) Light stalk:
Outer rotary switch on right hand stalk
is provided for selecting Position or
Head lamp High/Low beam. It operates
with Ignition switch in “IGN” position.
a) Head / Position lamp OFF.
Head lamp, position (Parking) lamp
and tail lamp will be OFF in this position.
b) Position lamp in ON.
Position (Parking) lamp and tail lamp
will be ON in this position.
c) Head / Position lamp ON.
Head lamp, position (Parking) lamp
and tail lamp will be ON in this position.
Toggling the lever (Stalk)